C2G HDMI® HDBASET OVER CAT5 EXTENDER

HDMI® HDBASET OVER CAT5 EXTENDER SINGLE GANG WALL PLATE TRANSMITTER

Product Description

The HDMI over Cat5 allows HDMI audio/video signals to be extended over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 300ft at a 1080p resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment. In addition, this solution utilizes TruChoice™ power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.


Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable

Product Specifications

Signal Specifications

• Video Signal Support - HDMI
• HDMI Features Supported - HDCP, 3D, Deep color, Dolby + DTS 7.1 Audio, Consumer Electronics Control (CEC)
• Maximum Video Resolution - 1080p
• Maximum Cable Distance - 300ft*
• Recommended Category Cable - Solid Cat5e or Cat6*

*Solid conductor Cat5 or Cat6 cabling is recommended for use with the digital products, HDMI and HDMI with RS232. Coiling of excess cable lengths should be avoided for best performance results. Shielded, solid conductor Cat5 or Cat6 cabling is recommended if a cable must be coiled or is run near other high-frequency signaling cables.

Power Adapter Specifications

• Input Voltage - 100-240V
• Output Voltage/Amperage - 18V, 1.0A
• Cable Length - 1.5m
• Plug Diameter - 4.75mm
• Center Pin Polarity - Positive

Physical Characteristics

• Video Input/Output Port - HDMI Female
• Data Input/Output Ports - RJ45 Female

Product Uses

•Classrooms
•Conference rooms
•Corporate environments
•Houses of worship
•Healthcare
•Digital signage

Package Contents

• Transmitter unit
• Aluminum wall plate
• Package of screws (6 screws)
• 2 washers
• Terminal block to DC jack adapter
• Power adapter
• User manua